A guide to cleaning and caring for your precision bearing ring.

Humans need showers.

Not because something is wrong with us, but because throughout the day, dust, skin oils, sweat, and tiny particles from our surroundings naturally build up.

Your ring is no different.

Especially when that ring is a precision mechanical bearing ring designed to spin.

It isn't just a piece of jewelry sitting on your finger.

It's a tiny mechanical system that moves every time you spin it.

And just like any moving mechanical system, it performs best when the parts stay clean.

Why Does a Bearing Ring Need Cleaning?

A traditional ring mainly needs to stay clean on the outside.

A bearing ring is different.

Its entire experience comes from movement.

Inside the ring, tiny rolling elements allow the inner and outer rings to move relative to each other. Because the clearances are extremely small, dust, skin oils, and other residues can gradually find their way into those tiny gaps.

At first, you may not notice anything.

But over time, you might start to feel:

• The rotation isn't as smooth as before
• A slight hesitation when spinning
• More resistance during rotation
• Shorter spin times
• A sticky or sluggish feeling
• Or even a strange "spring-back" sensation

That doesn't necessarily mean your bearing is damaged.

Sometimes, it simply needs a shower.

When Should You Clean Your Ring?

You don't need to clean it every day.

Instead, let the spinning feel tell you when it's time.

If you wear and spin your ring frequently, regular cleaning can help keep the bearing system running smoothly.

Pay particular attention when you start thinking:

"It doesn't feel as smooth as it used to."

That's a good time to clean it.

You don't need to wait until the ring becomes difficult to spin.

Removing accumulated oil and dust earlier is usually much easier than dealing with heavy buildup later.

How to Clean Your Precision Bearing Ring

The good news?

It's very simple.

You don't need to disassemble the ring.

You don't need special tools.

All you need is:

Water + dish soap + a few minutes.

STEP 1 — Prepare the Cleaning Solution

Fill a small container with clean water and add some dish soap.

We recommend using a slightly stronger concentration than you would normally use for washing your hands or dishes.

The goal is to help the cleaning solution penetrate the tiny gaps between the inner and outer rings and break down accumulated skin oils, dust, and residue.

You don't need an extremely concentrated solution.

Just enough to give the soap a chance to do its job.

STEP 2 — Soak for About 5 Minutes

Place the ring completely into the cleaning solution.

Let it soak for approximately 5 minutes.

This gives the solution time to work its way into the small gaps and loosen oil, dust, and other residue that may have accumulated inside.

Think of it as letting the ring take a bath.

STEP 3 — Spin It While It's Underwater

This is one of the most important parts.

While the ring is still submerged:

Rotate the outer ring as much as possible.

Move it back and forth and change the direction of rotation.

You don't need to force it.

The goal is simply to allow the cleaning solution to move through the bearing area while the ring is rotating.

The combination of soap + water + movement helps loosen and flush away contaminants that may be affecting the spinning performance.

STEP 4 — Rinse Thoroughly With Clean Water

Now rinse the ring thoroughly with clean water.

Pay special attention to the tiny gaps between the inner and outer rings.

While rinsing, continue rotating the ring so clean water can reach the moving parts and flush away the remaining soap, dust, and residue.

Repeat the process a few times if necessary.

The Most Important Step: Let It Dry Completely

This is perhaps the most important thing to remember.

Don't judge the ring's spinning performance immediately after washing it.

There may still be water trapped inside the tiny gaps between the rings.

While moisture is still present, the spinning feel may temporarily be different.

So after rinsing:

Let the ring dry completely.

You can allow it to air dry naturally. If you want to speed things up, you can use a hair dryer on a cool or low-temperature setting.

The important thing isn't simply making the outside of the ring dry.

The tiny internal gaps need to be completely dry as well.

Once the internal moisture has completely evaporated, the spinning performance should return to its normal feel.

So if your freshly washed ring doesn't feel perfect immediately:

Don't panic.

Give it time to dry completely first.

What If the Ring Starts Feeling Sluggish?

Here's the simplest rule we recommend remembering:

When the spin starts feeling sluggish, give it a shower.

Don't wait until the ring stops spinning altogether.

In many cases, sluggishness can simply be caused by the gradual accumulation of:

Skin Oil + Dust + Residue

Regular cleaning helps keep the bearing area cleaner and allows the rolling elements to move more freely.

It's similar to maintaining any precision mechanical system.

A little regular care can go a long way.

It's Not Broken. It Might Just Be Dirty.

We like to think of Spinity as something between jewelry and mechanical engineering.

It sits on your finger like jewelry.

But inside, it behaves like a tiny machine.

It moves.

It rotates.

It responds to every flick of your finger.

And because it actually works, it also needs a little care.

You don't need to take it apart.

You don't need complicated maintenance.

You don't need specialized tools.

Just give it a few minutes, some soapy water, a thorough rinse, and time to dry.

Then spin it again.

You may be surprised by how much smoother it feels.

The Simple Care Routine

If you don't want to remember everything in this article, just remember these four rules:

1. If it feels smooth, there's no need to over-clean it.

2.If the rotation starts feeling sluggish, give it a clean.

3. While cleaning, keep rotating the ring thoroughly in the cleaning solution.

4. The key goal is to flush the gaps between the inner and outer rings, where oil, dust, and residue may accumulate.

5. After cleaning, always let the ring dry completely before testing its performance.

A Ring That Moves Needs to Be Cared For.

Most rings are simply worn.

Spinity is meant to be used.

It spins.

It moves.

It becomes part of your everyday routine.

So yes, it will occasionally collect dust and skin oils.

And yes, sometimes it needs a shower.

That's not a weakness.

It's part of owning a real precision mechanical object.

Like humans, it just needs a little care from time to time.

Give it a shower. Let it dry. Then keep spinning.